Copyright notice

Copyrighted.com Registered & Protected 2015-2026 X-Fader All Rights Reserved
Important notice. Due to an agreement between PoliganToysTM and the author of this blog, no actual image of any Key RaidersTM prototypes may be posted.
Showing posts with label game. Show all posts
Showing posts with label game. Show all posts

Sunday, 22 December 2024

KR|Emergence Review #28: Emergence Expansion Kit for Tahron

Continuing our annual holiday tradition, this December PoliganToys sent me their prototype of the fifth and final expansion kit for the epic Tahron playset/game. Inspired by the 2021 KR|Emergence line, this kit brings exciting upgrades to ArtelonTM Tower and Rokang TarTM Tower for a fantastic new playing experience!

Description
The KR|Emergence Expansion Kit includes:
• 24 booster tokens for the game
• Two additional sections for Artelon Tower and a Doom Factory vehicle/playset to accompany Rokang Tar Tower, each with many features and accessories
• A bag with 75 translucent purple chips that are shaped like Antikythron crystals (or rather SpawnCrystals shards, as they are now referred to).

Except for giving an exhaustive description of the Artelon and Rokang Tar supplementary parts, I'm not going to detail these components and the game rules with the expansion pieces. You can find all this information in my post about the Origin Expansion Kit. I only need to remark that besides the usual properties, i.e., class, faction, strength, agility, and in some cases a special ability or limitation, each expansion piece is also characterised by a particular era (in this case Emergence) and a number of accumulable credits. The credit-chips included in this expansion kit are translucent purple, and spending 50 of them allows a player to recover up to six bricks, which were previously removed from the paying player’s wall, and reattach them on the same wall. In limited cases (i.e., primary era variants), expansion pieces present no credit, but are characterised by additional strength values and/or different agility patterns compared to their primary counterparts.

List of Emergence expansion pieces and their properties.

List of possible primary pieces variants in the Emergence Expansion Kit (only one piece is included in the kit).

Artelon Tower additional sections
Like with the original tower, these grey-and-ochre sections are loosely modelled after the monumental buildings carved out of rock in the ancient city of Petra. Each section's frontage is a labyrinth of ledges, steps and vine-clad walls, adorned with reptilian carvings and punctuated by windows of diverse shapes, some barred and some not.
Section 1 (placed to the left of Artelon Tower) - exterior: this section connects to Artelon Tower's base via a stone arch, creating a small cavity to shelter the turtle figure that came with the original set; the rear of the cavity is closed off with a metal grate. The lower level features a revolving structure that mimics the secret entrance to a cavern housing either a weapons chamber (perhaps a training room or a blacksmith forge) or an underground laboratory. This structure is composed of a cavern-like backdrop wall and two curved rock-like panels arranged in a "(–•–)" shape when viewed from above. When the wall aligns parallel to the façade, the weapons chamber side displays a snake-adorned wooden rack (equipped with a surujin—comprising a chain with a spiked ball and a sickle blade tied to either end—, a square-headed battle axe—with barbed double bits, a spiked handle and a studded guard—, and a large trapezoidal wooden shield—strengthened with a riveted metal rim, and equipped with spiked studs and a narrow T-shaped slit for looking through, reused from the Enmity Expansion Kit for Tahron—), while the lab side shows a scientific workstation with sculpted items such as a microscope, a Bunsen burner, vials and other glassware, safety goggles and a couple of weighty tomes. Conversely, when the wall is positioned perpendicular to the façade, either curved rock surface creates the illusion of sealing the cavern entrance. The upper level is characterised by the presence of a ledge, which is formed by the projecting "roof" of the rotating structure underneath and whose sides extend beyond the U-shaped outline (when viewed from above) of the lower level. While the right side features a pair of functional shackles hanging from its base, the left side bears three loose stepping stones on which a figure can stand. This platform functions as a catapult-like trap, which will be explained in more detail later. Additionally, there is a wooden shutter topped by a stone arch on the right, which can be flipped upwards to reveal a poseable crossbow-like weapon pivoting up and down on a horizontal metal axis. The section culminates in a volcano-shaped structure, which, unlike the cross-sectional design of the rest of the building, forms a complete circle when viewed from above. The volcano cone features three rattlesnake statues evenly spaced across its front slope, each exhibiting a scaly body in a slithering posture and seemingly moving upwards through the rock (only the tail end and head end are visible from outside). Each snake statue has a rotating head and an open mouth housing a trigger mechanism—by pressing up the lower jaw, it launches a forked-tongue missile. The cone is topped with a pliable greenish fluid cap, which can be removed to allow for additional play features. For instance, an included landing pad for the Serporcraft can be placed atop the volcano; this visually striking piece features diagonal wooden braces, skull-like ornaments adorning its outline, and three interchangeable accessories for the central area of the stone platform: a ball jointed flight stand, a rotating radar dish and a pivoting cannon (a bazooka reused from the Enmity Expansion Kit for Tahron). I'm sure that many details here draw inspiration from the design of Spaceship Himika in Kotetsu Jeeg!
Section 1 - interior: the inner side of the lower level mirrors the revolving feature of the outer side, converting the cavern into a weapons chamber, a bunker lab or a sealed-off space, depending on the orientation of the rotating structure. A number of stalactites hanging from the roof/ceiling and stalagmites rising from the floor (some of which can be swung down for improved playability) further enhance the cave-like ambiance. The upper level showcases a wall adorned with a blind arcade design and features a pressure-sensitive slab on the right side of the floor—when activated, for example by a figure stepping on it, the catapult-like trap outside is triggered, causing an invader to fall and the stepping stones to scatter. On the left side, there is a removable chained parapet displaying an Unnamed Clan insignia (i.e., a light-green snake emerging from an upright, spirally coiled conic dark-green shell on a dark-red background) and a poseable carbine—with a scope and a flashy magazine, reused from the Enmity Expansion Kit for Tahron—mounted on it; a position for a warrior to operate the crossbow at the window is also present. Moving upward, the previously hidden portions of the snake statues are now visible, while the edge of the volcano crater is equipped with a tapering rock structure projecting horizontally (this piece can be used to anchor a string for a zipline feature, which will be described later). The design of the floor between the lower and upper levels accommodates a circular central opening that incorporates a vertical rail extending from the base to the crater. This rail, equipped with a treadwheel mechanism positioned at its top and two interchangeable accessories, can be used either to lift a warrior in a wooden cage-like cabin, making them emerge from the crater, or to lower a prisoner, secured to a platform with foot manacles, into the ground level, where they will be confined within an iron maiden with two doors hinged on the rail.
Section 2 (placed to the right of Artelon Tower) - exterior: this section connects to Artelon Tower's base via a rugged, rocky ridge piece, while a sloping, suspended stone ramp edged with battlements links the section's peak to the middle level of the central building. A metal and timber bridge on the lower level leads to the opening of a mysterious chamber that extends forward beyond the building's frontage. This chamber is enclosed by a thick wall exhibiting an arched window with iron bars on the left and a winding stone stairway, which leaves space for a narrow "basement" window, on the right. The chamber's true purpose as a dungeon is revealed by a human skeleton (pinned against the inner right wall by a hinged metal assembly of three parallel, curved horizontal tubes connected at their ends, pivoting sideways like a door) and a grating of crossed metal bars on the floor. Lifting the grate exposes a pit seemingly filled with a greenish fluid as well as horrifying sculpted details such as a writhing mass of monstrous lizards (and their eggs), scattered bones and an assortment of old lost weapons. An enticing treasure chest atop a weathered wooden post outside the chamber's left corner triggers a trap, making the bridge swing up and locking an unwanted visitor inside. When closed, the bridge resembles a battered, riveted steel-plated door with a horizontal loophole and an embossed Unnamed Clan emblem. Climbing the stairs to the upper level, the façade shows from right to left: a wall carved with a menacing, Gorgon-like axe-wielding sculpture, surmounted by an overhanging turret with a wooden shutter plus crossbow feature matching the other section; a taller tower with a metal gate featuring two skull-topped hinged leaves, and covered by a tiled hip roof; an even taller tower, ominously topped with a swivelling reptilian eye encased in a boulder. The projecting ceiling of the dungeon underneath forms the floor of this level, composed of a grating of parallel wooden bars framed by a brick border and further reinforced by an outer perimeter of stone. Tilting the monstrous stone sculpture's metal axe forward triggers the collapse of the wooden grate, making a figure fall into the dungeon. The set also includes two separate snakes that can be positioned in various ways, such as hanging from the wooden bars of the upper grate or peering out from beneath the lower metal grate.
Section 2 - interior: the lower level reveals the rear dry stone wall of the dungeon, interspersed by a number of viewing gaps. A breakaway mechanism, activated by moving a ceremonial burning bowl atop a stone pile on the left corner, causes the wall to split open and expel small, pre-positioned stone fragments, creating an escape passage. The upper level is partitioned into three distinct sections by two dividing walls. The central section, designated as the entrance hall, is bookended by the metal gate on the outside and a narrow, arched stone passage (which is removable) on the inside. A lethal trap lurks between these two points—an additional mechanised spiked wall, activated from the left side, can crush an unsuspecting visitor. The left section contains the mechanism controlling the deadly spike-wall (i.e., a manually operated lever hinged on a horizontal wooden sliding beam) as well as a position for a warrior to operate the crossbow at the window. The right section incorporates a more futuristic design with plenty of tech-infused details. A periscope system, linked to the eye-boulder on the tower's top, allows for remote observation of the surrounding area. By manipulating the periscope, the observer can either push the tube upward to raise the eye-boulder on a telescopic tech-mech steel turret that turns left and right, or pull the tube down to trigger its detachment, sending it rolling down the external ramp to crush any potential invaders below. Finally, the design of the floor between the lower and upper levels integrates a hidden, pull-out "rope" ladder (actually a retractable piece made of rigid plastic, but with the ability to swing back and forth) as well as a horizontally projecting wooden beam adorned with a carved twining snake motif. This brings us to the above-mentioned zipline feature, created by stretching a string between the bars projecting from the two sections, allowing a figure to slide down using the suspended cage-like cabin (a reference to the system of cabins suspended on moving ropes as seen in the comics).

Doom Factory
The Doom Factory is a massive, tank-like mobile industrial facility operated by the Rexodons. It has a distinctive Brontosaurus-like shape, characterised by an ovoid main body and an elongated neck.
Exterior: its weathered bronze-and-steel surface exhibits a textured appearance reminiscent of scales mixed with tech-mech components. Its large, egg-shaped main body tapers to a short, thick tail section, and has a surface that is densely punctuated with tubes, armatures reaching to the sky, chimneys and other industrial details; additionally, a sort of spine sail (which reminds me of the iconic sails of the Sydney Opera House) protrudes from the domed upper covering. The rear side of the main body features a posable double cannon, while two additional laser guns and a communication antenna can be plugged into various slots. The construction possesses a long, seemingly segmented (i.e., consisting of a series of conical tubes, each fitted into the top of the one below and tied together) mechanical boom that curves upwards, resembling a dinosaur's neck and head; this structure is actually a bucket chain excavator for surface mining and dredging operations. It employs a series of buckets mounted on a flexible revolving chain, similar to a chainsaw blade. As the chain rotates, powered by a large wheel located in the "head", the buckets attached to it dig into the ground or collect scrap metal. The scooped material is then transported along the chain inside the neck, until the buckets reach the end of their cycle, where they empty their contents into a skip bin. The discharged material is subsequently processed within the factory. The neck has three sturdy points of articulation, allowing it to move both vertically and horizontally, and supports the power wheel that houses a rounded cockpit, reminiscent of iconic vehicles like the Rimfire from Spiral Zone, the G.I. Joe Buzz Boar or other similar toys. The cockpit is designed to seat one figure and is adorned with intricate details, including tooth-like motifs, pairs of hinged control levers and pedals, and two ball-jointed cannons that mimic the eyes of the Brontosaurus. Originally, the design included a flexible, moving belt driven by a manually operated treadmill; however, to reduce costs and enable the neck and head articulation, this feature was ultimately abandoned and replaced with a turning bucket wheel (simulating the end of the bucket chain) and a slot allowing three included pieces of junk to slide down a chute within the neck. The main body is supported by eight massive tracks, two on each corner (the treads don't actually roll here, but each pair of tracks is mounted on a wheel underneath), resembling the bent legs of a crouching dinosaur. This crawler-transporter enables the factory to move slowly across the mining site, and is equipped with a pair of large auger drill bits located at the front, which rotate as the toy is rolled forward or backward. Both the neck and tail sections are hinged at their bases, allowing them to be raised; this reveals the front entrance of the main body, accessible via a retractable ramp, and a rear drainage channel outlet.
Interior: the primary feature of this set is its opening mechanism to expose the interior of the factory, inspired by the iconic designs of the TMNT Technodrome and He-Man's Nordor playsets. The rear and top sections of the main body swing upward, creating a tall wall. The side sections then pivot outward, each stabilised by a dinosaur leg-shaped armature that rotates downward and secures the structure to the ground. Finally, two platforms, initially positioned vertically against the inner central section, fold down and spread out in a fan-like manner, connecting with the side sections; the upper "fan leaf" of each platform carries a hinged panel that can flip up, while the lower one features a large slot that mimics a floor hatch leading to the mechanical systems below. When opened, the interior is characterised by a network of exposed pipes, cables and circuitry, and each section is divided into two or more levels. The lower level of the left section displays a storage room for raw materials, while the corresponding platform is characterised by a flip-up control panel and a transparent-walled melting tank plugged into the slot. The upper level houses a fabrication area equipped with lathes, milling machines and presses. A hinged manhole with a ladder attached horizontally to its underside provides access to the storage area below when flipped down. Additionally, a gunner position with a swing-down window allows for the attachment of a poseable laser gun (one of those deployed externally). The lower level of the right section showcases a conveyor belt equipped with a pivoting quality control scanner, while the corresponding platform serves as an assembly area, characterised by a flip-up tools rack and a rotating half-bust robotic trooper on a pedestal plugged into the slot. The upper level contains a command pod, furnished with a computer and chair, as well as another gunner position with a swing-down window that accommodates a poseable laser gun (the second one of those deployed externally). Finally, the lower level of the central section is dominated by a large, articulated robotic arm that can be manually controlled. The arm's grab (a mix of a clamshell bucket and on orange-peel grab) can clutch a piece of junk, which was previously slid down the external chute and deposited into the factory's skip. The robotic arm can then swivel and drop the collected piece directly into the melting tank. The upper level incorporates a large control screen on the wall, which can be customised with two interchangeable image display options. This screen has a kind of otherworldly appearance, resembling an interdimensional mirror-portal encased in an elaborate, close-fitting bronze frame. Additionally, an optional curved metal bridge with railings can be plugged in, to connect the two upper side levels. This bridge is carefully notched to avoid interfering with the robotic arm's movement, and its barrier features a poseable ooze pipe that feeds the melting tank below (a pack of orange slime is included). An even higher level has a platform for a gunner to control a poseable double cannon (the same cannon that is located on the rare part of the main body when the set is closed) through the wall. The initial design for the set also featured a semi-buried duct piece connecting the Doom Factory to Rokang Tar Tower; however, this element was ultimately removed from the final plans.


The KR|Emergence Expansion Kit is fully compatible with the previous Tahron board game sets, including the KR|Origin, KR|Enmity, KR|Dimness and KR|Horizon Expansion Kits. Overall, this kit is a real treat for any Key Raiders fans! The included playset parts are incredible and finally provide the long-awaited expansions for Artelon and Rokang Tar towers. While I still hold out hope for more KR playsets in the future, completing the original Tahron set (and game!) feels like the perfect capstone to a truly special collection. It's hard to imagine another toy line ever capturing the same magic.

Happy holidays!!!

Friday, 22 December 2023

KR|Horizon Review #31: Horizon Expansion Kit for Tahron

PoliganToys sent me their prototype of the fourth expansion kit for the epic Tahron playset/game. This kit is inspired by the KR|Horizon line, which was presented back in 2020. DekropolisTM Tower finally gets an upgrade and, at the same time, the Dekropolis Skyship makes its debut in toy form for a new great playing experience!

Description
The KR|Horizon Expansion Kit includes:
• 24 booster tokens for the game
• An additional Dekropolis Skyship vehicle with many features and accessories, including the possibility to transform some of its parts into additional sections for Dekropolis Tower
• A bag with 75 translucent blue chips that are shaped like Antikythron crystals (or rather SpawnCrystals shards, as they are now referred to).

Except for giving an exhaustive description of the Dekropolis vehicle/playset, I'm not going to detail these components and the game rules with the expansion pieces. You can find all this information in my post about the Origin Expansion Kit. I only need to remark that besides the usual properties, i.e., class, faction, strength, agility, and in some cases a special ability or limitation, each expansion piece is also characterised by a particular era (in this case Horizon) and a number of accumulable credits. The credit-chips included in this expansion kit are translucent blue, and spending 40 of them allows a player to capture any rival’s piece that has previously conquered the paying player’s wall, and move it onto the rival’s wall. In limited cases (i.e., primary era variants), expansion pieces present no credit, but are characterised by additional strength values and/or different agility patterns compared to their primary counterparts.

List of Horizon expansion pieces and their properties.

List of possible primary pieces variants in the Horizon Expansion Kit (only one piece is included in the kit).

Dekropolis Tower additional sections / Dekropolis Skyship
Although this set comes in the form of a fortress that flies through the sky, the original concept is for four new towers to complement the main building that came with the Tahron playset. To make things clear, let's check out the process through which the five-tower decommissioned shipyard transforms into a skyship in the comics. The central tower is interconnected with the four surrounding smaller towers through metal grated bridges, forming a cruciform structure that kind of reminds me of Voltron's Castle of Lions. When the transformation begins, the four outer towers compress vertically, their levels merging to form four roughly disc-shaped power-source structures. The elevator shaft of each tower, initially positioned beneath the power-source, moves to the external side through a double hinge mechanism to assume the form of an engine nacelle, which generates either vertical lift force for take-off and landing or, by eventually swivelling horizontally, thrust for forward flight. The entire construction lifts off and, subsequently, the central tower's middle section divides radially into four sectors, revealing two pairs of additional nacelles at the sides and allowing the remaining portion of the tower to pivot into a horizontal position. As the central tower turns and the middle section recompacts, the four power-sources plus bridges also rotate from their front-and-rear layout to an over-and-under, X-Wing-like configuration, while maintaining their individual horizontal orientation. This synchronised movement transforms the static structure into a powered skyship, ready to take flight. The primary propulsion system uses a confined magma chamber located at the rear of the skyship, whose activation is indicated by an array of glowing portholes on the tail section, followed by an explosive thrust that propels the vessel forward. I wonder whether the worm-like creature originally inhabiting the magma reservoir beneath Dekropolis could withstand the ignition process! Manoeuvrability is ensured by the eight engine nacelles strategically located at the wing bases and tips. During normal flight, these thrusters are positioned horizontally and the four movable wings are spread open in a distinctive X-shaped configuration, with stabilising energy arcs connecting the pairs of power-sources on either side, maximising stability and lift. However, when engaged in combat, the wings can be locked into a closed attack position, transforming the skyship into a formidable strike aircraft. With a 90° rotation, the eight thrusters acquire a vertical orientation, granting the skyship VTOL capabilities as well as the ability to hover in mid-air. When taking off, landing or remaining in one place in the air or on the ground, the four power-sources and wings/bridges once again align in a front-and-rear configuration. Now, let's take a closer look at the toy.
Skyship - exterior: stretching from stem to stern, the massive (did I mention that it's big?!) metallic light-blue and pearlescent white skyship features a vessel-like hull that bears a front-facing, emerald-hued viewport reminiscent of a watchful eye, surmounted by a fairly long prow similar to a bird's neck (this detail reminds me of the Serenity spacecraft from Firefly). Four pairs of small wing-like retractable structures, resembling oars, adorn the ship's sides, while a saucer-shaped midsection houses the crew's quarters and control centre. A commanding bridge rises from behind the midsection, providing an elevated vantage point for the crew to direct their operations. Completing the skyship's imposing form are a powerful propulsion system at its rear (covered with a number of glow-in-the-dark portholes), and four main wings plus power-sources, each mounted on an additional engine nacelle attached to the midsection. The whole exterior of the ship is covered in sculpted tech-mech details, giving it a sleek and futuristic look: the upper side is adorned with multiple light defence turrets and sensing systems, while the underside boasts an array of small propulsors and GITD thrusters. The skyship's overall design is a cool mix of elements that obviously draw inspiration from iconic sci-fi vessels, like the above-mentioned X-Wing Starfighter and Serenity, plus some other neat ones such as The Gunstar from The Last Starfighter and The Odyssey from Ulysses 31.
Skyship - interior: after removing the five exterior panels on the top of the skyship to reveal the aircraft’s awesome interior, one is immediately struck by the seamless integration of the building's original features into the now airborne vessel. The front section of the ship showcases a cockpit with a seat (which is actually sculpted like two adjacent seats but can only accommodate one figure, whose face aligns with the narrow windshield at the front of the prow) positioned in front of a raised platform, on which a figure can stand to direct operations from behind the pilot. An elliptical floor observation window provides an unobstructed view of the ground and is topped by a 360° rotating, translucent holographic map of Tahron. A roundish double sliding door, once possibly a passage between floors, now serves as a transition point between the main front room and the command centre nestled within the mid-section, which is adorned with intricate sculpted details, including a network of pipes and cables as well as up/down pivoting control panels on consoles along the sides (these enable the deployment of hidden cannons on the ship’s remaining top exterior on the sides). This area also gives access to two smaller armouries flanking the cockpit, which are equipped with folding doors and store an arsenal of included weapons and accessories such as three golden-yellow swords that double as guns (reused from the Enmity Expansion Kit for Tahron) and three red parachute backpacks. Two side doors that once seemingly provided access to the exterior have been converted into floor panels that can be lifted for "maintenance" of the mechanical systems below, fictionally offering convenient entry points to the lower levels of the ship. Moving further into the ship, we encounter a jail cell located towards the rear of the vessel. It has a sliding prison door with clear yellow-green horizontal bars (probably made of energy) and functional shackles (with clear yellow-green energy effects twisted around their length) on the wall to keep captives secure, while its floor, once the main overhead gate, can serve as a posterior ramp that lowers to deploy an army of Destructomorph Goblins. Finally, the swinging walls that once defined the main building's defence system have been repurposed as storage compartment hatches on either side of the rear ramp, for stowing both explosives (with a sliding mechanisms to drop a set of two-plus-two included bombs on unsuspecting Therioms below) and the two assault vehicles that came with Dekropolis Tower.
Additional towers: the gimmick for this vehicle/playset is that all the bits of the wings, power-sources and thrusters come apart and then can be reassembled in the form of four towers, which can be joined to Dekropolis Tower from the Tahron playset by means of the four metal wing/bridge pieces. It has to be said that this configuration doesn't look fantastic and there's not really a lot to it in terms of playing use.
Each tower consists of four levels: a cruciform base, a mezzanine floor, a first floor equipped with lifting side panels, and a top turret. In its raised position, one side panel serves as a support for one of the bridges, which is loosely connected to the main tower at its opposite end; a finger-operated mechanism can cause the panel to close abruptly, leading to the collapse of the bridge. Without the turret, the tower's top surface can serve as a landing pad for some vehicles (it is indeed a slot for a flight stand on which, for example, a Rotakord can perch). Furthermore, each tower features several plug-in accessories, including a two-bladed, wind mill-like rotor, which also functions as a sort of radar antenna, as well as ventilation apparatuses attached to the front and back of the two upper floors, and a pivoting three-gun cannon that attaches to the top of the first floor. A semi-functional elevator (or rather a small goods lift) slides within the central shaft and is driven by a string and held by a hook. The mezzanine and first floors are additionally connected by two vertical stabilizing panels that also serve as tech-looking ladders. According to the comics, in the past these four towers featured multiple facilities for the shipyard staff, including sleeping quarters, a holodeck interface for advanced simulations, a medical wing, a canteen with a fully stocked kitchen, and a recreation deck equipped with training and leisure amenities. So, on the inner borders of the four mezzanine floors, we find different stickers that remind us of the original facilities that once occupied these spaces.
Transformation of the towers into the skyship wings: when disassembled, the central shaft of each tower transforms into two side jet engines housed in nacelles that are equipped with front-facing turbines derived from the ventilation apparatuses. The three main levels (the base, the mezzanine, which is equipped with wheels on the bottom, and the first floor) combine to form the casing of the power-source, which features rear and side storage compartments. The cargo bay on the back is accessible through a rear hatch and can be used to store the elevator cabin. The lifting side panels provide access to additional storage areas for the stabilising panels/ladders. The top turret attaches to the front of the power-source, forming a tapered nose with an opening panel that reveals a hidden missile launcher (alongside an included separate missile). The front rotating radar antenna attaches to the top, becoming an overhead rotor. The three-gun cannon can be reconfigured into three separate components: a main gun that can be attached to a slot on the front top of the power-source's casing, and two smaller side guns that can be mounted under the nose's two winglets. Finally, one thruster attaches directly to the power-source externally, while the other fastens to the side of the main ship and then connects to the corresponding power-source via a metal bridge/wing piece; the thrusters can be attached either horizontally (with over-and-under wings) for flight mode or vertically (with front-and-rear wings) for VTOL/hovering mode. The flight mode setup is finalised with two translucent yellow-green energy arcs joining the pairs of power-sources on either side as well as with a wheeled (seemingly tracked) landing gear piece plugged into the undercarriage of the ship's main body, to enable it to move smoothly over a flat surface. The VTOL mode is completed with five explosive thruster stands, four plugged in the outer nacelles and one in the ship's underside, to display the skyship as it begins to take flight or land (they can also be used as jet effects in the outer thrusters and in the main propulsion system with the ship in flight mode).


The KR|Horizon Expansion Kit is fully compatible with the previous Tahron board game sets, including the KR|Origin, KR|Enmity and KR|Dimness Expansion Kits. Overall, this awesome set combines the coolness of a vehicle with the fun of a playset. The imposing skyship is the star attraction, and while it has a few minor imperfections, its impressive scale makes it a standout display piece. The transformation feature adds an extra layer of playability, but the towers could benefit from some improvements in their playing use. Still, this is a great set that's worth getting for the ship alone.
Fun fact: in the KR|Echoes of Future series, Silef's waterfront laboratory (which strongly resembles the Black Diamond library building in Copenhagen) is located at the very spot where Dekropolis will be built by the Therioms roughly 560 years later.

Happy holidays!!!

Thursday, 22 December 2022

KR|Dimness Review #27: Dimness Expansion Kit for Tahron

PoliganToys sent me their prototype of the third expansion kit for the epic Tahron playset/game. This kit is inspired by the KR|Dimness line, which was presented back in 2019. The UcamurTM Citadel makes its debut in playset form for a new great playing experience!

Description
The KR|Dimness Expansion Kit includes:
• 24 booster tokens for the game
• An additional Ucamur Citadel playset with many features and accessories
• A bag with 75 translucent green chips that are shaped like Antikythron crystals (or rather SpawnCrystals shards, as they are now referred to).

Except for giving an exhaustive description of the Ucamur Citadel playset, I'm not going to detail these components and the game rules with the expansion pieces. You can find all this information in my post about the Origin Expansion Kit. I only need to remark that besides the usual properties, i.e., class, faction, strength, agility, and in some cases a special ability or limitation, each expansion piece is also characterised by a particular era (in this case Dimness) and a number of accumulable credits. The credit-chips included in this expansion kit are translucent green, and spending 30 of them allows a player to know the identity of any unexposed Second Line token, with or without showing it to their opponent. In limited cases (i.e., primary era variants), expansion pieces present no credit, but are characterised by additional strength values and/or different agility patterns compared to their primary counterparts.

List of Dimness expansion pieces and their properties.

List of possible primary pieces variants in the Dimness Expansion Kit (only one piece is included in the kit).

Ucamur Citadel
This playset represents an historicist-like fortress built on top of an enchanted tree above a swampy area, and displays a dark green-and-brown paint that fits right in with the KR|Dimness aesthetic.
Fictionally, the bog is surrounded by high, rugged hills that delimit the Ucamur region. The sentient tree was created by the Multiversal Balancers, for transferring vital faculties to other living beings at risk of extinction. When the tree's mission was completed successfully, its crown died out, while its trunk and roots entered a quiescent state. Millions of years later, the tree top was used as the foundation of the citadel commissioned by a mysterious warlord as a retreat, who paid for its construction out of his personal fortune and used it as a private residence until he died. Shortly after his death, the Therioms appropriated the abandoned fortress and used it as a site of exile for war criminals.
The set is composed of four main sections: a base, a tree, a fortress and a ramp.
Section 1 (base): the piece on which the playset rests looks like a thick layer of swirly, brownish muddy soil. The sculpt of this piece is incredible and the paintwork definitely matches the quality of the sculpt. The front part (extending beyond the grooves in which the next component is placed) is a terrifying pit filled with resin, from which horrific plant creatures emerge. It can be filled up with water or with the honey-orange oozy material that came with the Mother-Plant, and features two separate, detachable 3D figures with knotty greenish-brown wooden bodies: a vine monster and a man-eating plant creature. The vine monster has three tendrils with devilish red eyes on them snaking their way out of the resin swamp; it is an incredibly well done solid piece that is made of harder plastic on the bottom and from a bendy wire rubber on the top. The main body is not bendable or anything, but it does look like it's moving thanks to how it is sculpted; the ends of the three tendrils are not super-bendable, but they do give you the chance to get the creature positioned how you like to fit your display. The man-eating plant creature resembles the upper body of a Plant-Man slightly and has some basic articulation: a ball jointed Venus flytrap head with a hinged jaw and two swivel-hinged vine-like arms with clawed hands. The bases of these two monsters can plug into the surface of the pit to keep them in place, but you can replace them with the upper bodies of two real Plant-Men surfacing or two Forseha warriors sinking, if you will. Sculpted in the pit is also a little parasite poking his head out of a small semi-submerged cave and crawling ashore to perch himself on the rocks; this piece has no articulation whatsoever, but it's a fearsome little guy too. The rear part of the base has a hidden quicksand-trap feature placed in the middle - it's a sort of spring-loaded bear trap (slightly resembling the jaws of a monster and activated by a small lever) that can grab onto a figure’s feet. It's one of the coolest parts of the entire set! Other concepts considered for this section included a small snapping tree trunk that could bite or trap figures, a vine-tangle trap inspired by a hair brush whose bristles converge when its rubbery cushion base is pressed, and a side button that would illuminate the resin pit with an eerie glow; all three ideas were ultimately scrapped.
Section 2 (tree trunk) - exterior: this semicircular, dark-green (with a brown wash) piece snaps into place on the base (although it cannot just rest, because it wouldn’t support the weight of the remaining part of the playset, but there are little “teeth” that help the two pieces lock together) and represents the tree trunk used as the load-bearing foundation of the citadel. It has large roots sticking out from the sides, but the most impressive part is without a doubt the sentient tree's demon-like face growing out of the front side of the trunk. The sculpt is wonderful with amazing detail - I love the thick bark texture with fissures and deep cracks worked in the features of its face. The eyes are excellent too (although a splash of deep red colour on them would have looked awesome), while the upper jaw has two ball jointed fangs that can be positioned in various ways. The lower jaw (complete with a sort of beard) is hinged and can be operated using a small lever located on the proper right side (hidden in the roots), while a pair of branch-like arms near the mouth can move together (with a twisting-and-retracting movement, to capture approaching figures) by means of another small lever on the proper left side. When the mouth is closed, the lower jaw is located high in a tree hollow and makes it possible to access the interior of the trunk. Hidden in the rough, uneven bark protecting the surface of the trunk on the proper right side, is another natural tree hole that acts as a secondary entrance leading to the inside.
Section 2 - interior: the inner side of the tree trunk shows roots sculpted everywhere near ground level. The main hollow/entrance looks like a wooden archway with volutes and other decorative elements, something you would expect to see in an ancient temple dedicated to some malevolent divinity. There is a prison cell to hold someone captive on the left side of the trunk; this has chains, bones and rats sculpted on the inside, a locking door (which can be unlatched with the flick of a spider-shaped release switch) with irregular bars made of wood, and a small barred window on one side. It is very nicely scaled for most KR figures and there is plenty of room for Wordron to keep a Forseha warrior locked up. The tree hole in the right side of the trunk, which works as an auxiliary entrance, is surrounded by a sculpted monstrous face and is equipped with soft plastic vines hanging from the top. A dummy version of the Plant-Beast (a smaller-sized imitation of the front part of the creature equipped with a hinged jaw and held by a stick) can be manipulated through this hole, making it crawl to the inside of the tree and attack a figure trapped in the quicksand.
Section 3 (citadel) - exterior: the roughly semicircular fortress, which is modelled after Neuschwanstein Castle, is supported by the tree trunk (again, there are teeth that have to lock into place) and is easily the coolest part of this playset, as it's the largest and the most impressive. There aren't many play features on the outside, but the excellent sculpt, capturing a fine line between appearing carved by hands and looking craggy, makes for one of the coolest KR backdrops you could ask for. The stony façade is painted in grey with a dark, brown wash, and shows cracks to make it look weathered, some vines climbing the walls, claw-like pinnacles made from spiked rocks, and numerous creepy little carved gargoyles and demon faces coming out of the living stone. There are also many other interesting sculpted details such as a number of windows with wooden ledges and balconies, little staircases, wooden side doors and barred windows (including a round one that can slide out, possibly serving as a secret escape passage). The hinged exterior wooden door that closes the gateway to the inside at the front of the fortress is marvellous! It is made out of two layers of wood planks: the grain of the wood runs vertically on the front layer and horizontally on the back, like a simple form of plywood. The two layers are seemingly held together by iron studs, and the whole structure is strengthened and stiffened with iron bands. The studs themselves are pointed on the front, so that attackers would damage their weapons while trying to break through. The paintwork almost makes this door look like it's actually made of wood and metal, which is pretty cool, and I love how menacing and ominous the toothed bat/vampire crest on the front looks. There is also a secondary wooden doorway with metal ornamentations on one side, but it's got some broken slats and looks a bit rusty too. The building includes four watchtowers, two of which can be equipped with optional half dome-shaped tiled roofs. One of the towers rests atop one side of the fortress and is removable (I'll get to that in a minute).
Section 3 - interior: on the inside, there are more demon faces and gargoyles sculpted on the walls. The lower level features a wooden floor with a trapdoor (a metal grating activated by a melting skull-shaped button, through which a figure drops into the prison cell underneath) on the left side, a vita-ray-esque chamber used by Wordron to transform the sickly cloisterers of the Drojyo'BhakmaTM Monastery into muscle bound soldiers (it is actually just the front panel, but it's a pretty fun example of the steampunk technology present in this fortress, and seeing all of the wires, the clear window and the tech-monster face embedded in the upper part gets your imagination going) on the right side, two wooden load-bearing posts (to support the upper floor) more towards the middle, and an arched double stairway (with two symmetrical curved flights shaped like giant spines, both rising to a throne on the next floor) in the centre. Turning the monstrous face-shaped knob of the chamber activates a play feature in which the image of a figure placed behind the device comes to life and disappears thanks to a magnifying effect of the front window. While it is possible to pose figures on the steps of the staircase, it's going to take some real concentration and expert balance, but I can understand that the sculptors probably wanted to retain a more organic feel. However, on the right flight, there is a small group of steps that can collapse (i.e., swing down) by hitting a higher step-shaped button, causing a figure to fall. The upper level features a stone floor, a wooden door on the left side (the above-mentioned secondary doorway, which lets out on a ledge and then shuts again using a gargoyle-shaped candle stand on a nearby stony table as a lever), a little door that opens to reveal a secret storage compartment for weapons or artefacts (there are lots of mysterious, otherworldly symbols on this and it kind of reminds me of the evil counterpart of the case that holds the three enchanted helmets inside of Theriom City) on the right side, and two columns designed to look like some sort of ceremonial pillars (which can rotate to reveal hidden spiral staircases leading to two of the four tower-tops) towards the middle. The idea was that one of the two columns/towers would be a removable microphone communicating with a Bluetooth speaker - the concept's main gimmick was the talking tree-monster, where you would speak into the tower microphone and move the mouth from the lever on the side. Instead, the tower was made as a simple removable pillar, to leave a pedestal onto which you can place the Mother-Plant. The missing gimmick doesn't bother me though. The throne in the centre, to which the two stairways rise, consists of a seat formed from skulls cemented together and a backrest carved into the front of a tree trunk (whose rear retains its natural trunk-like appearance) with some spiky branches projecting from the sides, the overall shape vaguely evoking the skeletal structure of a bat. It's an excellent rendition of the throne used by Wordron in the comics; the paintwork is really cool, giving it a mixture of light and dark hues of grey and brown, and the sculpted detail is amazing. To help you get up and down between floors, apart from the main stairways the set comes with two separate wooden grappling ladders that can hang anywhere (there are some slots and notches here and there, to help them be more stable). Each of the four towers has a cool little platform that gives Wordron and his henchmen a place to stand, watch and guard the entrances to their lair. The platforms can support a variety of included accessories, namely a Dark Legion soft goods flag, a perch on which two crows roost, a ballista equipped with a separate harpoon-shaped bolt, and a 2-part flat piece cast in a translucent orange plastic and looking like Wordron's giant ghostly manifestation after being killed (it has a stand and features an "opening mouth" effect thanks to one of its parts being able to slide up).
Section 4 (ramp): to make their way toward the fortress' main entrance, the Forseha warriors will have to cross the swampy ground by traversing a menacing, rickety old ramp climbing up. This piece has some excellent detail on the stone slabs that make it up, with some great paint applications showing the age of the structure. The ramp looks cool and is littered with vines, while strewn weapons and bones, a cluster of skulls and a gravestone are sculpted into the U-shaped rock piece on the bottom, which fits around the resin pit of the base. However, well, it's a bit small. The comic book version has a curved path that leads from the ground level to the front of the building where the main door is located. The toy version makes it shorter and almost straight, with a steep stair-like lower level, adding in some extra height, but making it less of a ramp and more of a decorative feature. Visually it looks more rugged and untamed, but the downside is that it only fits one archway instead of two. It doesn't look too bad though, and the KR figures don't seem to have a hard time walking up the path, but it seems like the ramp needed to be a couple inches longer to accommodate a second archway or at least to make it have two figures fighting comfortably on it. The archway is made of a large flat capstone laid on two upright haunted sculptures. Each statue resembles a gargoyle (very similar to Demo-Rha's three-faced demon-ghost and wearing a triple diadem with a mitre-like crown supporting the stone) mounted on a plinth and entwined with thorny vines (there are even a couple of crows standing on it). The torsos of the two gargoyles, which fictionally have the ability to animate due to the living vines twined round them, can be rotated synchronously by turning a cobblestone-shaped knob on top of the capstone, and made to grab and hold a figure passing between them with the vines' hand-shaped tendrils (this feature was originally intended to be activated by two levers under the base, making the capstone fall, but was changed eventually). At the end of the ramp there’s a platform, which looks like a sealed abandoned well (there's some nice paint detail on the floor), placed in front of the main entrance and flanked by two curved woody stems of dead shrubs with spiny branches. When these are tilted towards each other above the platform, a figure standing on it drops through a double trap door into a rubbery net seemingly made of vines. The net hangs from snake-shaped bronze posts and is suspended over the resin pit, facing the tree-monster. The two tilted stems form a wooden archway with a tree hole where they meet and connect, through which you can pour some resin ooze on the prisoner in the net. A very cool feature is that the positions of the net and the prison cell are interchangeable, meaning that each can slide out from its own location and be placed below the other trap-door. Alternatively, the platform can be filled with ooze and its trap-door mechanism can be overridden through a switch underneath, making it possible for a Plant-Man to rise from under the platform, break the seal and emerge from a puddle of resin. I like this feature a lot, as it creates a setting for an evil creature to scare the bejesus out of unwelcome visitors.


The KR|Dimness Expansion Kit is fully compatible with the previous Tahron board game sets, including the KR|Origin and KR|Enmity Expansion Kits. Overall, if nothing else can be said about the playset, let it be said that it is massive, overwhelming, and visually stunning. The plastic quality is excellent, and the set feels very, very sturdy. The paintwork is just so well done, too. There are really lots of nicely captured details here, from the painted vines growing out from between the crevices, to the dark shading on the various surfaces. It is excellent looking!

Happy holidays!!!

Monday, 20 December 2021

KR|Enmity Review #27: Enmity Expansion Kit for Tahron

PoliganToys sent me their prototype of the second expansion kit for the epic Tahron playset/game. This kit is inspired by the KR|Enmity line, which was presented back in 2018. The O-Kin Fortress makes its debut in playset form for a new great playing experience!

Description
The KR|Enmity Expansion Kit features:
• 24 booster tokens for the game
• An additional O-Kin Fortress playset with many accessories
• A bag with 75 translucent yellow chips that are shaped like Antikythron crystals (or rather SpawnCrystals shards, as they are now referred to).

Except for giving an exhaustive description of the O-Kin Fortress playset, I'm not going to detail these components and the game rules with the expansion pieces. You can find all this information in my post about the Origin Expansion Kit. I only need to remark that besides the usual properties, i.e., class, faction, strength, agility, and in some cases a special ability or limitation, each expansion piece is also characterised by a particular era (in this case Enmity) and a number of accumulable credits. The credit-chips included in this expansion kit are translucent yellow, and spending 20 of them allows a player to collect one token in the Reinforcement Area, with no need for him to invade the opponent’s Frontline. In limited cases (i.e., primary era variants), expansion pieces present no credit, but are characterised by additional strength values and/or different agility patterns compared to their primary counterparts.

List of Enmity expansion pieces and their properties.

List of possible primary pieces variants in the Enmity Expansion Kit (only one piece is included in the kit).

O-Kin Fortress
This playset represents a walled, stony burg located on a rocky mountaintop, and displays a nice post-sunset orange/pink glow. The two parts of the fortress are attached via sturdy hinges, which allow you to open up and display the fully assembled playset with the two sections side by side, or to fold it up, lock the opening sides securely in place with swivelling latches, and carry the whole thing by an included handle.
Section 1 (left) - exterior: the lower level looks like a slightly receding, rocky slope of a mountain dotted with sculpted scrub vegetation. The upper level is characterised by a projecting vestibule that includes two independently barred doors with a small in-between space (in which a figure can stand), to delay enemy penetration. This controlled entryway to the fortress has an outer wooden door strengthened with riveted metal bands, an inner yett made of latticed metal bars, two grated windows in the flanks, and a murder hole in the ceiling of the passageway. The two hinged parts of the wooden door are ornamented with O-Kin's Golden Eagle emblem (i.e., an eagle with two crossed axes) in the centre and have a latch that can be raised and lowered. While the yett is hinged in the manner of a traditional gate, its frame is hinged at the bottom edge, so that in the lowered position the grille is flush against the internal floor, mimicking a breaching action. The rooftop features a watchtower equipped with a brattice. The latter has a floor opening through which the defenders can fire, throw or pour harmful objects or substances such as arrows, rocks and boiling liquids down on attackers standing under the murder hole; the set comes with a small boulderstone as well as a tilted bucket from which an amber liquid (hot oil?) flows in a stream. The brattice can collapse (i.e., swing down) by hitting a stone-shaped button (carved in the style of a weathered escutcheon) on the outside wall of the fortress, causing a figure to fall and the upper parapet (a separate wooden piece strengthened with riveted metal bands, and equipped with upward spikes and a smaller version of the Golden Eagle emblem) to detach.
Section 1 - interior: the inner side of the mountain slope is carved with a number of blind arcades, which are an obvious reference to the appearance of O-Kin's training/combat tiltyard shown in Flares of enmity. This rather barren sector does have a play feature, though. The central part of the wall is a lose piece that just slides out or in - the idea is that you can have an attacker burst in through the wall beneath the entryway or a prisoner break free from the inside of the fortress. It's a bit tricky to get it to work properly, but it's kind of fun. Optionally, in this room you can place a nicely sculpted small model of Theriom City, for planning attacks on the Dark Legion's enemies. The upper level features a grandiose room decorated with engaged columns, which acts as a throne hall, although instead of Lord Tafmohr's crystal throne there's a sort of podium; this movable structure consists of three adjacent platforms of different heights, on which the ruler of O-Kin may stand flanked by two additional characters (e.g., guards), and displays steps on the front as well as an elaborate pomp-like background. The rooftop presents a battlement-like parapet and a peg for placing a flag. The latter is a sturdy plastic piece that has an ornamented golden spear-pole and a sticker on each side of the flag: one side shows the fortress is governed by O-Kin's legitimate ruler, the other side shows that things are administered by the Dark Legion. You can fly the proper colours for whomever happens to be in control at the time.
Section 2 (right) - exterior: the front surface of the lower level has an opening that looks like a large cave entrance, but is actually a prison gateway. The upper level shows a grated window flanked by two arrowslits; a raised portcullis, consisting of a latticed grille made of a combination of wood and metal, stands in front of those apertures. The top is characterised by a bartizan armed with a wrecking ball hung from a projecting wooden beam. This revolving arm is furnished with dual handgrips and a wooden face shield (strengthened with riveted metal bands, and equipped with upward spikes and a narrow T-shaped slit for looking through), and can be used to knock down attackers attempting to scale the defensive wall with the aid of an included grappling ladder. The main play feature of this section is that the metal ball is attached to a string, which runs down to the vertically-closing gate; the string, whose length is adjustable, is placed over the projecting arm on the bartizan and is snapped into place thanks to a blocking mechanism. When the turret's blocking mechanism is released by means of a lever, the string retracts completely and the prison's gate slides down and slams shut, capturing any figure inside the dungeon. Additionally, when the portcullis is lowered, the grated window (plus frame) on the upper level can swing down (the presence of a slit prevents the string from getting in the way) and reveal a weapon (more on this later). This section also features a cascade of water falling from the top part near the hinges. In front of the waterfall, there is a narrow suspension footbridge (with rope fences) that connects two stairways (which lead from the prison gateway to the fortress entryway, and are equipped with stumble steps) on the two sections. The bridge is the only part that must be removed in order to fold up the playset.
Section 2 - interior: the lower level features a prison equipped with a pair of real chains and hinged manacles to shackle a captive, which can be attached to the side wall, as well as a creepy torture rack and a functional pillory hinged on one side. The prison cell also features some sculpted torture instruments hanging on the wall, including a breast ripper, a shrew's fiddle, a thumbscrew and a saw-toothed cleaver. The upper level functions as both a workshop and an armoury, and is characterised by the presence of a beautifully designed workbench for Wordron's crazy experiments, which doubles as a weapons rack - on one side, the piece features a frame made out of wooden bars on which a number of included weapons can lay on horizontal slats or hang on steel bolts and be available for quick accessibility. This rack enables multiple ways to hold the different weapons in place, and there are also cool wooden pegs on the side that allow a shield to clip on. Additionally, the weapons can be mounted to several slots on the wooden gratings on the walls of the room as an alternative display/storage option, or to the parapets using swivelling/hinged plastic clips. The 16 weapons include: two silver derringers (for some cool akimbo action); a silver halberd-like weapon in the form of a combined adze, spear and kama; a bronze sword that doubles as a gun; two kunai-like bronze throwing knives; two golden battle-axes (reminiscent of the Golden Eagle emblem, although they're repaints of Herrion's single-bladed axe); a bronze staff (identical to Fai-Rha's jō, but in a different colour); a golden carbine with a scope and a flashy magazine; a silver bazooka (which doubles as a cannon when attached to the inner side of the swinging window), a bronze mace whose head looks like a large, elaborate pyramidal spear head; a tech-looking golden slingshot; a large trapezoidal wooden shield (strengthened with a riveted metal rim, and equipped with spiked studs and a narrow T-shaped slit for looking through); and two golden longbows that double as crossbows. Like with the other section, the rooftop has a peg for placing a second flag identical to the one described previously. In addition, there are two slots for attaching an optional arch-shaped carrying handle.


The KR|Enmity Expansion Kit is fully compatible with the previous Tahron board game sets, including the KR|Origin Expansion Kit. Overall, the O-Kin Fortress is a fantastic playset that both fans who play with the game, as well as those who only enjoy the toys will love. The sculpt, accessories, features, and altogether display and appearance make this a great set.

Happy holidays!!!

Sunday, 20 December 2020

KR|Origin Review #27: Origin Expansion Kit for Tahron

Yes, after one year of waiting and sheer anticipation since my review of the epic Tahron playset/game, the prototype of the very first expansion kit for that grand theatre of war has finally arrived to my home!

Description
The KR|Origin Expansion Kit features:
• 24 booster tokens for the game
• Two additional sections and several accessories for Theriom City Tower
• A bag with 75 translucent red chips that are shaped like Antikythron crystals

I'm going to describe these components separately.

Booster Tokens
The primary tokens comprise the basic complement of pieces that can be used to play the game; this may be expanded with booster tokens from expansion kits, which contain 24 pieces of varying qualities. One of these tokens is usually a rare piece that is much harder to obtain than the remaining pieces.
Similarly to the primary tokens, each booster token is composed of a hollow cylindrical sandy taupe base and a double mini staction figure - the latter can be reversed and half-inserted into the former, in order to show, in accordance with the progress of the game, either a generic warrior piece (face down token) or a specific one (face up token), which can represent either a completely new character or a new version of a primary piece. The cylindrical base bears a pointer, which is used to indicate the player who owns the piece.
Besides the usual properties, i.e., class, faction, strength, agility, and in some cases a special ability or limitation, each expansion piece is also characterised by a particular era (in this case Origin) and a number of accumulable credits. In limited cases (i.e., primary era variants), expansion pieces present no credit, but are characterised by additional strength values and/or different agility patterns compared to their primary counterparts.

List of Origin expansion pieces and their properties.

List of possible primary pieces variants in the Origin Expansion Kit (only one piece is included in the kit).

Theriom City Tower additional sections
Like with the original tower, the red&gold frontages of these two sections are loosely modelled after Beijing's Forbidden City. These two parts attach to the two sides of Theriom City Tower via sturdy hinges, which allow you to open up the fully assembled playset and display it with the three sections side by side, or to fold it up with each additional section positioned at a 90 degree angle to the original tower.
Section 1 (placed to the left of Theriom Tower) - exterior: the lower level features a Colosseum-like façade with a semi-decagonal plan, flanked externally by a short bridge carrying a flag-lined path across a river (yes, there's even a small sculpted piece of river), which connects an arch-shaped secondary gateway (ornamented with a large gilded Theriom emblem and holding an elaborate bronze symbolic cistern that contains a massive egg-shaped opalescent blue-white gemstone) to an elevator shaft. The upper level is characterised by the presence of a couple of small translucent blue windows (one of which can be opened) and a ledge holding a white marble sundial. The elevator shaft (ending with futuristic slender spires, and enclosing a moving chair driven by a string and held by a hook) leads to a rooftop featuring a slot for a flight stand (on which an Aviotak can perch, but I wish this space were used for the Gyrocarrier's domed heliport with elevated runway!) and a small watchtower equipped with a parapet and a rigid Theriom flag (whose pole looks like a sort of antenna).
Section 1 - interior: the inner side of the semi-decagonal wall presents a training facility, with sculpted weapons and combat-related equipment. Next to it (behind the elevator shaft), there is a bricky prison cell with a translucent blue opening door. The upper level features a room that acts both as a library and a gallery, containing shelves with collections of books and artefacts, and an array of paintings (mostly portraits of members of the Amhalgaard family). This chamber is modelled after the Amber Room and is furnished with a cloth-covered chair (equipped with two golden clips and a pillow) and a book stand; it is worth noting that due to the low ceiling, this level cannot accommodate for a standing figure. The rooftop presents several parapets and a space for parking more Aviotak aircrafts (which don't actually fit). There are also two slots for attaching an optional carrying handle - more on this later.
Section 2 (placed to the right of Theriom Tower) - exterior: the front wall of the lower level has an opening overhead door, which is (hardly) large enough to accommodate a vehicle like CoBoN. The upper level has a ledge served by stairways from both the lower level and the rooftop, and features small parapets at different levels. The top is characterised by a pyramidal roof, and a large watchtower equipped with a parapet and a rigid Theriom flag (whose pole, also in this case, looks like a sort of antenna). All the parapet pieces included in this playset are removable and can be re-positioned in different spots.
Section 2 - interior: the lower level features a garage/workshop for housing and repairing a vehicle, which is equipped with a mechanically elevating car lift, a workbench full of sculpted maintenance tools (such as a meter of some sort and a welding gun), a control panel on which instruments and controls for machinery and communication are fixed, and a lab shelf with glass containers for chemicals. Next to it, there is a small garden with sculpted shrubs and flowers, which is seemingly an outdoor space separated from the garage by a wall and an upright pillar (the latter being an obvious reference to a gazebo—furnished with table, seats, benches and sculptures—that is missing in this playset). The upper level is dominated by a dining room (sometimes used as a music room) with large mirror stickers, which is modelled after the Hall of Mirrors. It contains a table with sculpted cutlery, bowls of food, fruit baskets and two separate goblets of wine (these cups are chromed with gold, have a nice design patterned around the outside, and hold a dark-purple “liquid”), an elaborate chandelier hanging from a caisson ceiling, and a fireplace with a flame-like lenticular sticker and a removable grate; six chairs are also included, but they can't really fit in the room when the table is present.
Additionally, the set comes with an alabaster throne that has an elaborate, predominantly red rug permanently attached to it, which is meant to replace the conference table in the council room of Theriom City Tower, in order to match the Origin (and also the Enmity) series' throne hall look. Every intricate detail of this throne, crafted with the utmost care, radiates an aura of majesty and authority.
There is also a set of optional swivelling latches and a carrying handle, which allow you to safely lock the opening sides of the assembled playset and to carry this by the handle.

Game rules with expansion pieces
Setup
The setup of a game with booster tokens is identical to the one of the original game, with the only difference that each player may have an optional side-set of up to 15 booster tokens of his choice (but he may not have more than two primary era variant pieces). Each player must present his side-set of face down booster tokens to the rival before a battle, and allow the rival to count and record the number of pieces upon request. The booster tokens of each side-set are put aside (where the opponent cannot see them) and turned up before the primary tokens are shuffled, and those pieces are considered being temporarily outside the game.

Declaration
The declaration process may be influenced by knowledge of the identity of the booster tokens in each player’s own side-set.

Game play
A player may exchange any number of pieces between the side-set and the playing set during each battle, but the number of pieces in the side-set after the exchange must be the same as the number of pieces before the exchange. The exchange enables a player to modify the playing pieces in order to gain new abilities and suit a game strategy against the opponent.

Exchange is only allowed:
• Between two pieces that have both identical faction colour (for example yellow, red or brown) and identical ID letter (X, A, B, C, …, K)
• By a player who has just played a primary piece
• Immediately after that primary piece has been played.

For example, if a player moves the piece Masq-Lor from his Frontline to his Battlefield on the gameboard, the same player will be allowed in that moment to exchange that piece with a piece belonging to a yellow faction and with ID letter “D” from his side-set, if any is available. Moving exposed Second Line tokens one leap straight and turning them up are not considered actions that allow players to exchange pieces. After an exchange, the game continues with the original rules.

Use of credits and end of battle
Credits in the form of coloured chips may only be collected if the exchanged piece eventually conquers one of the two walls. Other abilities provided by variants, such as increased strength and/or different agility, may be used at the most convenient moment during a single fight.

Immediately after a fight and before the start of the following one, a player who has accumulated enough credits may decide to make use of them. Only one player may use his credits after each fight; if both players decide to use their credits after the same fight, the player who has the highest total number of credits will have the priority, but will not be allowed to spend more credits at the end of the next fight (he will be allowed to spend more credits at the end of the fight after next).

Depending on the colour of the accumulated credits, these may be spent to gain certain abilities with pre-defined costs.
The chips included in the Origin expansion kit are translucent red, and spending 10 of them allows a player to decide which player leads on the next fight and whether the play continues with the lead from the trench or the frontline, avoiding a roll of the die.
After each battle, each player must recollect any booster tokens he used from his side-set. The side-set can be modified before the next battle, and any accumulated credits can be kept for use during the following battles.


Overall, this set is fantastic, and really channels the sense of wonder and greatness of last year's Tahron playset/board game prototype. I'm going to abstain from making any claims about the game play enhancements, because I just haven't spent enough time playing with it. The additional playset sections are quite well designed though, with only a few questionable decisions (the many horizontal surfaces that are way too narrow, and the too low ceiling in the library/gallery room), and come with lots of nice, fun accessories.

Happy holidays!!!

Saturday, 21 December 2019

KR Review #81: Tahron

It seems that the impossible might finally become possible! Wow, is it Christmas? Yes, it is!

When PoliganToys first geared up for Key Raiders, there were two items that I immediately started thinking about: the board game that originally inspired this universe and a playset for the toys. The board game could be relatively easy, but the playset seemed impossible. I was reminded again and again of the obstacles: it would be too complicated, too big, too expensive.

A bit more than four years after writing my first review of a KR figure prototype, both the game and the first playset are finally a reality, at least in prototype form. The process to combine them in a single item and to make it not obnoxiously large was definitely complicated. And if it's ever released, it will be expensive. But, on the whole, it will be worth it.

In a nutshell, the Tahron playset is the largest KR item ever to be produced by PoliganToys and can be used for playing the Key Raiders Game, a two-player strategy game played with staction figures and magnetic bricks on a board fitted with two vertical walls. The game's mechanic involves hand management, grid movement and pattern recognition, and its aim is to open a gateway in the opponent’s multiversal wall. The two players try to reach that goal by defeating each other during several battles and fights, in order to remove as many bricks as possible from each other’s wall.

Details
Name: Tahron
Subtitle: mystical land of magic and science
Classification: area of land
Home: Tahron
Affiliation: shared by Theriom, Destructomorph, Rexodon and Spektrosaur
Rank: theatre of war.

Description
The playset/board game features:
• 45 tokens for the game
• A gameboard/battleground scenery
• Two multiversal walls with 100 magnetic bricks (50 gold and 50 silver)
• Four towers that can be placed at the four corners of the gameboard for being used with the KR action figures
• Four additional ramps and countless accessories for the towers
• Three chips that are shaped and coloured like Antikythron crystals
• A six-sided die.

I'm going to describe all these components separately.

Tokens
Each token is composed of a hollow cylindrical grey-brown base and a double mini staction figure - the latter can be reversed and half-inserted into the former, in order to show, in accordance with the progress of the game, either a generic warrior piece (face down token) or a specific one (face up token). The cylindrical base bears a pointer, which is used to indicate the player who owns the piece. The properties of each specific warrior, which are summarised in the table below, are: class (22 Gold pieces, 22 Silver pieces and one Aether piece), a special ability or limitation (only carried by some pieces), faction (11 Theriom pieces, 11 Destructomorph pieces, 11 Rexodon pieces, 11 Spektrosaur pieces and one Neutral piece), agility (a style of moving/capturing similarly to chess pieces – 24 Riders, 12 Leapers and 8 Jumpers) and strength (a numerical value between 1 and 13 or, in one case, equal to 100)

List of game pieces and their properties.

Gameboard
The gameboard/battleground scenery has 100 alternated gold and silver step-stones arranged in a 10-by-10 grid. The 10 rows (or ranks) are denoted with numbers 1 to 10, while the 10 columns (or files) are denoted with letters a to j. The board is divided into two main zones: a Gold Zone and a Silver Zone. In the Gold Zone, rank 1 is called Trench, rank 2 becomes elevated and sustained by a removable Multiversal Wall, rank 3 is called Second Line, rank 4 is called Frontline and rank 5 is called Battlefield; in the Silver Zone, from rank 10 to 6, the nomenclature is identical. The side of the board nearest to file “a” presents a Declaration Area and a Reinforcement Area, while the opposite side presents a Round Area.

Multiversal Walls
Each wall is modelled after the Great Wall of China, and carries a row of 10 alternated gold and silver step-stones on the top as well as 50 removable bricks arranged in a 10-by-5 grid on the front. Each brick bears a symbol related to the KR mythos.

Theriom City Tower (Theriom)
Exterior: this red&gold tower is modelled after Beijing's Forbidden City. There are two gargoyle-like stone statues standing in front of a majestic opening wooden gate ornamented with the Theriom symbol (i.e., a seven-pointed golden star with the two side points elongated); each statue resembles a sitting minotaur/centaur creature with bat wings and a lion head on the back and chest of its humanoid upper body, and has moving head, arms and tail
Interior: a metal sculpture of a chimeric creature (similar to those outside) on a stone pedestal can be positioned on the lower, bricky level and can split open to showcase the three enchanted helmets (which came with Foundation Elykta and are not included with this set). An oval holographic conference table (which features a map of Tahron, is supported by an eccentric stand and is accompanied by three chairs) can be placed in the council room on the upper level, where scenes related to Tahron mythology/history have been frescoed on the wall and ceiling; the wall also has a holder to store the four halberds in a criss-crossed way, and an escape door that leads to an outside balcony. A Combat Training Robot action figure is also included and can be connected to a swivelling charging unit in the lower level. For those who might have forgotten, at the beginning of the sixth comic issue of the Foundation series, Tir-Hing is shown to struggle with defeating a Combat Training unit and has to be saved by his Troopers. This robot is normally in an R2D2-like diminutive droid form, which is the 5-inch tall version coming with this set. Coloured metallic light-blue, gold and silver, it rolls on two legs and features a two-side body with alternate appearances, so the figure can be turned to be displayed to one's liking. The pivoting domed head (which is ball jointed and interchangeable with other figures) utilises a pair of photo-receptors (a single black camera lens on one side and a more complex bronze telephoto lens on the other side); the bin-shaped torso bears a sort of conical drill bit at the bottom and two symbols on the front (a gold Theriom emblem on one side and a light-blue glowing disc on the other side); the swivelling shoulder articulation joints at the top of the legs hold four fully articulated mechanical arms (two with claws that grasp an axe and a shield on one side, and two with rotating mace and blade attachments on the other side); finally the feet have pairs of motorised all-terrain wheels on one side and small rocket boosters on the other side. Hopefully, one day we'll also get the much cooler expanded form.

Dekropolis Tower (Destructomorph)
Exterior: this metallic light-blue&pearlescent white tower represents the central building of the five-tower decommissioned shipyard seen in the comics. The base features a flooded detention basin, while the front of the building has an opening overhead gate (which, when closed, resembles a broad ladder staircase ascending to the upper level) and two swinging walls that reveal retractable pivoting laser cannons with seats and flip-up canopies (these are removable and can be used as one-man aerial assault vehicles). The upper level shows an open structure reminiscent of a launch bay (which can optionally be blocked with an included hinged double-leaf door), flanked by two sculpted doors and surmounted by an elliptical observation window. The window has been modified by Deptilion by adding some railings, which make it appear almost like an insect eye from a distance. A removable turret on top of the domed roof can work as an escape pod that seats one figure in a lying position
Interior: the lower level is used as a prison and has two giant chains, which are made of plastic and are connected to a flat disk attached to the ground (almost any figure can be cuffed to these shackles). The floor with the attached chains can be lifted to reveal a magma chamber inhabited by a horrifying worm-like, star-nosed creature with a number of fleshy, beady-eyed radiating tentacles around its monstrous snout (the monster emerging from the red hot magma is a separate piece and has a ball jointed head). The upper level looks like a technological laboratory and shows, alongside a Destructomorph emblem (i.e., a square-shaped blueish spider whose back slightly resembles a demoniac face, partly chiselled on a shield above the observation window and partly wrapped around its frame), many sculpted details such as pivoting control panels, pipes and cables, while a secret compartment made to slide horizontally in and out of the ceiling/floor between the lower and upper levels allows for hiding Deptilion's halberd.

Rokang Tar Tower (Rexodon)
Exterior: this dark-bronze&steel building, which is modelled after the ogival, redented towers of Angkor Wat, is the tallest of the four towers and the one that has most features. However, apart from a curved stairway that leads to a sort of rose window displaying the Rexodon symbol (i.e., a red reptile skull), there's not much going on outside
Interior: there are four floors - the base (or foundation), two mid-levels and a top level. The base has a dungeon with a sculpted spiked floor grate (for invaders to fall on) as well as a three-section angular metal cage with an opening door and bars ending in spear tips, to hold one prisoner; the back wall features two sculpted, non-functional doors, evoking the underground chambers where the Rexodons store powerful relics. The lower mid-level has a futuristic-looking metal throne, which fits Bi-Harr's figure and is suspended from the ceiling, and a round vault-like entrance door hinged on the wall. The throne is adorned with intricate fluorescent patterns as well as sculpted saurian designs on the headrest and armrests, while a sinister, large reptile eye is carved into the surface of the door, which is the inner side of the rose window (this has a bird-like gargoyle perched atop the inner frame and is flanked by two dinosaur-skull fountains, reminiscent of Bi-Harr's heads, spewing out a blood-like crimson liquid). The upper mid-level is a control centre with a computer console (with images on the screen that can change by turning a dial) mounted on the wall as well as a slot through which the top of the throne fits; a circular piece of plastic locks the throne in place and can be concealed by a chair that allows a figure (for example Loghar) to sit at the computer. The throne can be rotated by turning the circular piece around, allowing a trap door (which appears like a low-rise stairway leading up to the throne, flanked in the comics by humanoid, headless marble statues) on the lower mid-level to open and a figure to drop in the dungeon. The front of the bud-shaped top level of the tower (which features some great detail work - with some difficulties, you can make out a reptile skull in its pattern) can swing open, revealing a base for attaching a swivelling/hinged cannon with seat, dual handgrips, HUD face shield and spring-loaded firing mechanism for two missiles; the cannon base shows some nice tech-mech details such as circuitry and gears, and can also serve as a perch for a Pterajet. Each level of the tower can be reached by a working elevator, which can be manually raised and lowered by means of a Rexodon emblem-shaped hand crank (not sure this will be included in the final product) at the base of the elevator shaft; the shaft has a ball jointed ceratopsian skull ornament on top, which can also be used as a head for any figures.

Artelon Tower (Spektrosaur)
Exterior: this grey&ochre tower is modelled after Petra's Al-Khazneh. The central feature of this building is the giant cobra head-shaped facade with eyes and fangs that glow in the dark. The base features a moat as well as a lockable two-segment drawbridge (which folds in the shape of the number 1, where the main portion is emblazoned with a metal Spektrosaur emblem that has a GITD flame, while the "serif" at the top includes the fangs) as the cobra's gaping mouth; by pushing a stone-button in the adjacent wall, the chained, toothed drawbridge drops down and extends across the moat to two ground-fixed torches, thereby letting a figure enter the tower. A number of weapons are sculpted into the bottom of the moat, alongside various bones, a series of footprints, and a crocodile with a hinged upper jaw right under the drawbridge. There is also a separate turtle figure that can be placed in the moat. The moat is fed by a greenish waterfall off the side wall of the building, cascading from a snake-head rock formation with a chipped fang; the falls, which look like venom pouring from the serpent's mouth, are also visible from the inside and are slightly translucent, so if you have a light source behind it, they look like they're glowing... that's pretty menacing! Additionally, rubber pieces resembling trickles and drips of the greenish fluid adorn the top of the tower and the floors inside the building, respectively. A pair of viper-shaped statues, emerging from skull-like wall ornaments to the left and right of the cobra façade, have scaly upper bodies in defensive posture that can fictionally animate to lunge and bite at any interloping warriors (in the toy, they can pivot, bend forward and open their jaws using two handles on the inside of the tower); there are four metal chains that run from the cobra's hood to two metal "collars" around the vipers' bodies
Interior: the lower level simply features the entrance hall, marked by four stone pillars: two imposing ones, along with some stickers adorning the space atop them, flank the gateway from the front, while two slender ones, encircled by snake-like sculptures, support the upper level. The stickers are quite interesting - they resemble bookcases with mystical items such as an animal statue, a crystal ball, a skull, a small metallic treasure chest, a flask containing a fluid, a genie-like oil lamp, and a key, as well as some maps and other fun knick-knacks. The upper level showcases a lizardy theropod skeleton (with ball jointed head) set on a stepped stone base, which works as a bone-throne for Lor-Drek, its seat covered with fulvous fur marked with brown blotches and stripes (a closer look reveals that the throne vaguely resembles a monstrous skull, with the various parts of the skeleton forming its distinctive facial features and open maw). Two Spektrosaur standards (each made of cloth and displaying a greenish flame) as well as two wooden torches on the wall (which work as handles for moving the viper statues) flank the throne behind, while two floor flames illuminate its front; additionally, two slots at the rear accommodate Lor-Drek's halberd and wooden staff, completing its authoritarian aura. Two wooden grappling ladders that can hang anywhere (there are some slots and notches here and there, to help them be more stable), and four horned skull-shaped bony grappling hooks, which can be used by the Spektrosaur Troopers to swing along the front section chains, are also included.

Ramps
Each tower has a matching ramp that can lead to the gameboard, when it is used as a battleground scenery, or can potentially work to connect the towers to future building extensions.

Game rules
The rules of the game are almost identical to a similar game named WallBreachTM.

Setup
The board is placed with a gold step-stone at the right-hand end of the rank nearest to each player. The player nearest to the Gold Zone is referred to as the Gold Player and the opposing player is the Silver Player.

At the beginning of the game, gold and silver bricks are separately shuffled face down by each player. Each group of bricks is arranged face down in a 10-by-5 grid and then attached to one of the two Multiversal Walls. The two players exchange their walls and these are placed on ranks 2 (Gold Wall) and 9 (Silver Wall); the step-stones on the top of each wall must match the step-stones on the board. Each player rolls the die; the higher roll determines the dealer for the first battle. The tokens are shuffled face down and dealt randomly to each of the two players.

Each player receives a total of 20 tokens, which are placed on the board as follows:
• 10 tokens are positioned on the Trench (rank 1 or 10) and then instantly turned up and revealed
• 5 tokens are positioned on the Second Line (rank 3 or 8), on the step-stones of the same class (gold or silver) as the corresponding zone
• 5 tokens are positioned on the Frontline (rank 4 or 7), on the step-stones of the opposite class as the corresponding zone, and then instantly turned up and revealed.

Additionally, the remaining 5 tokens are dealt on the five step-stones of the Reinforcement Area.

Declaration
After the deal, players call in turn, starting from the dealer’s rival, electing either to declare or to pass.
A declaration for the current battle is represented by a double roll of the die, which determines:
1. The target number of wins (1 → 6 wins, 2 → 7 wins, 3 → 8 wins, 4 → 9 wins, 5 → 10 wins, 6 → a re-roll must be made by the the same player)
2. The faction that will be ruling (1 → Spektrosaur, 2 → Rexodon, 3 → Destructomorph, 4 → Theriom, 5 → Neutral, 6 → a re-roll must be made by the the same player).

For example, a declaration of 7|Destructomorph indicates that the player intends to win at least seven fights with Destructomorph being the ruling faction. A player who declares 7|Destructomorph may be outdone by his rival on 7|Theriom or 7|Neutral, but not 7|Spektrosaur or 7|Rexodon. Other options are to declare 8 or more of any faction, or pass.

Eventually, one of the two players passes or loses and the declaration is decided. The declaration result and winner must be indicated on the apposite areas on the board using the chips. The numbers enclosed between square brackets in the Declaration Area are used for calculating the score at the end of each battle.

If nobody makes a declaration, the battle is declared dead and a re-shuffle and re-deal is made.

It is important to note that:
• The Deity behaves in all respects as a member of the ruling faction; it is the only ruling piece when the ruling faction is Neutral; it is the highest piece and always wins over every other piece
• The strength of a D-piece depends on the declaration: 8 for D-pieces of non-ruling factions, 13 for the D-piece of the ruling faction and 12 for the auxiliary D-piece (i.e., the D-piece of the same class as the ruling faction)
• The auxiliary D-piece behaves in all respects as a member of the ruling faction and not of its original faction.

Game play
Each battle focuses on 10 fights and ends with a total of 10 step-stones conquered on the two Multiversal Walls. The declaration winner throws the die and, in accordance with the result, checks the corresponding space in the Round Area. Along with the instructions indicated, the players alternately move four pieces (one at a time) on the board.

For example, if the value of the die is 3:
• The Gold Player moves one piece from rank 1 to rank 5
• The Silver Player moves one piece from rank 10 to rank 6
• The Gold Player moves another piece from rank 4 to rank 5
• Finally, the Silver Player moves another piece from rank 7 to rank 6.

Each piece may be moved on either the same file or an adjacent one. Players must follow the lead faction, if they can. When the first piece belongs to the ruling faction (including the Deity and the auxiliary D-piece), this must be followed by any other piece that is considered a ruler (again, including the Deity and the auxiliary D-piece), if possible. If a player no longer has any pieces of the faction that is led, he may play any piece in his side.

After all four pieces have been played, the strongest ruling faction piece or, if no ruling faction piece is played, the strongest piece of the lead faction is named the Raider. The player who owns the Raider is designated the Attacker and moves the Raider to any unoccupied step-stone on the opponent’s Multiversal Wall. The opposing player is the Defender and may start a combat which involves the three pieces on the Battlefield ranks and the Raider on the wall. All the other pieces are not involved in the combat and do not obstruct the combating pieces, which may move in accordance with their agility.

At this point, four cases may occur:
• The Defender cannot engage in any combat, since neither piece in his possession can capture any Attacker’s pieces. The Attacker wins, the fight is over and the Defender’s wall is conquered by the Raider, which is now named the Conqueror
• At least one Defender’s piece can capture an Attacker’s piece. The combat continues with the players alternately moving and capturing one piece at a time, until the player to move has no further legal moves or gets his C-piece captured. This player loses and the fight is over. The combat winning piece is named the Conqueror and is moved to any unoccupied step-stone on the wall of the losing player
• The Defender cannot engage in any combat, since neither piece in his possession can capture any Attacker’s pieces. However, at least one Defender’s piece is a B-, D- or H-piece with a special ability: it can invade the Attacker’s Frontline according to its agility, and collect one token in the Reinforcement Area. The Defender checks the identity of the collected token behind his own wall, sorts through his pieces in the Trench, discards the least-useful one (possibly including the piece picked up from the Reinforcement Area) and places it face down aside. The Attacker wins, the fight is over and the Defender’s wall is conquered by the Raider, which is now named the Conqueror
• The Raider is the Deity. The Attacker wins, the fight is over and the Defender’s wall is conquered by the Raider, which is now named the Conqueror.

After each fight, the Conqueror returns face down and plays no further part in the battle, although it is not removed from its position (its step-stone on the wall remains occupied). Any other pieces that played part in the fight and are still present on the board are removed from play. Any exposed Second Line tokens advance one leap straight and are turned up. The winner of the fight throws the die to determine which player leads on the next fight.

Once all 10 fights have been played, the battle is concluded and the score is calculated. The player opposite to the previous dealer deals for the next battle.

Score calculation and end of game
During a battle the goal is for each player to accomplish at least the declared number of wins.

For example, if the final declaration is 8|Theriom:
• A player wins the battle winning at least eight fights and is awarded the removal of a number of brick-pairs from his rival’s Multiversal Wall equal to the sum of the values between square brackets on the Declaration Area, in this case 8 [11] + Theriom [4] = 15. There is no extra score for any additional fights the player may win in excess of the declaration
• If none of the two players wins eight fights or more, half the number of brick-pairs is removed from the wall of the player who won the fewest fights or, if the battle is a 5-5 draw, from the wall of each player. In this case, the total number of brick-pairs is odd, then it is rounded down to the nearest even number, which is 14 (seven brick-pairs are removed).

The rules of the brick-pairs removal are inspired by Shisen-Sho, a Japanese tile-based game, and can be summarised as follows:
• Only two matching bricks can be removed at a time
• Two bricks can only be removed if they can be connected with a maximum of three horizontal and/or vertical lines, starting and ending at the centre of the bricks
• Lines may only pass through removed bricks.

A player wins the game by removing all the 50 bricks from the rival’s wall or when future moves are not possible, even if bricks are left on the wall.


Overall, the first KR playset and the KR game are here! I had a blast reviewing Tahron. Yes, it’s big, but I’m so glad I got it. PoliganToys did a great job with this thing... it just wouldn't be a toy line until it got a playset and a related game. It also makes me wonder if they could do it again. Is there really a chance this giant could sit at the centre of my floor with expansion parts around it? Well, even if I don’t get other playset pieces, this one is what I needed. It should be the triumphant culmination of the line. And I think it is that.

Happy holidays!!!